240 V, 1 PH, 86.1 A  Coolant heat power 11 KW, 1 HP pump  Oil heat power 6 KW, 1 HP power  The reason we are selling this unit as used is because it was kept in a humid room and it has some superficial rust on three hose...

120 VAC  1 Ph input power  -40 deg C to 200 deg C  Flow 15L/min  Stainless steel bath 7 liters (1.9 Gallons)  Unit tested good from -13.1 to 96.7 deg C  Tested with water and antifreeze  ...

Removed from working equipment. Very good physical condition. Hydraulic pump: 1000 psi, 3600 psi max, 15 HP motor. See T72232 Reservoir for this unit.

115 V  1 Ph  Temp range -40 deg C to -85 deg C  Capacity 5 cu Ft  Tested down to -53 deg C  Temp in controller was -45 deg C but actual temp checked with an external calibrated thermometer was -53 deg...

240 V, 1 Ph, 81.45 A  Coolant heat power 11 Kw  Oil heat power 6 Kw  Unit looks like it was never used

Oil heating power 6 KW 3 HP pump

Input power: 208/230 VAC 1 PH  Unit turns on  Control responding to keys entered  Compressor starts up but unit is not cooling down at all  Good physical condition with no visible missing components 

Removed from working equipment. Very good physical condition. Reservoir dimensions: 30" x 20" x 13" (just the container). 115 V, 1 PH, 1/4 HP, 1725 RPM. No oil in unit. Reservoir for pump T72233.

240 V, 1 PH, 81.45 A  Coolant heat power 11 Kw, 0.75 HP pump  Oil heat power 6 Kw, 1 HP pump  Unit looks in good condition but water pump looks like the impeller casing was replaced and pump is a little noisy when impeller...

Interior Dims: 17x47x15 In  Temp range: 0C/32F to -45C/-50F Capacity 68 cu Ft  Refrigerant R-404A Good physical condition  Good gasket condition  Paint scratches and spots  Unit tested down to -38 c 

208/230 V  1 PH  Refrigerant QRF0062 Unit turns on but compressor doesn't start  Not cooling down  Control & freezer in good physical condition  Chamber with some rust  Chasis has some dents and scratches 

In good condition