Input Power 550 VAC  3 Ph  Stroke 1-1/2 In  Die area 30x20 In  Speed range 150 Ton 1000 strokes per min  Unit comes with motor, hydraulic pump and controls removed  Controls have interconnection cables cut and need...

Input power 550 VAC 3 Ph  Stroke 1-1/2 In  Die area 30x20 In  Speed range 150-1000 strikes per min  Unit comes with motor, hydraulic pump and controls removed  Controls have the inter-connector cables cut and need to be...

Input Power 230 VAC 3 Ph 80 In Roll Capacity Machine was in production line and in working condition, All 3 units we interconnected w harness in pipes, and were disassembled carefully paying attention to cable identification.   One servo...

460 V  34 A  3 PH  60 Hz  Spindle 2450 RPM  Unit turns on and loads NT windows and application software Since we do not have experience or manual of this machine we were just able to enter the application software and...

Abrasive blade up to 24 In Diam  25 Hp, 3 Ph, 240/480 motor  Angle cut adjustable -45 to 45 Deg  Machines has controls and hydraulics disconnected which can be reconnected  One valve broken  Blade raise hydraulic control...

220V/440  3 Ph Table 10x50 Spindle Motor 3 HP Table Travel x Axis 35 inches Table Travel Y Axis 16.3 inches Table Travel Z axis 5 inches Report: Control turns on, loads program but is reporting a message " D5PZ-5 motion control board + 1...

220V/440  3 Ph Table 10x50 Spindle Motor 3 HP Table Travel x Axis 35 inches Table Travel Y Axis 16.3 inches Table Travel Z axis 5 inches Report: Control turns on, loads program but is reporting a message " D5PZ-5 motion control board + 1...

Basic functions for this machine have been tested. Start/Stop, motor, shaft turning, and oil pump have been checked. Other adjustments like light and heavy pressure were not tested, neither the dial adjustment knob. We noticed that when the foot...

120/208 Volts, 3PH Unit reported to us in working condition It may need some minor adjustments Includes tooling /parts 1 extra spare servo driver

220 V 1 PH

Power 220 3 Ph Distance between centers 95 inches Swing over bed 12.5 inches 3 Jaw Chuck

220/120 VAC, 1 PH. Unit tested. Polisher and grinding sections working good. Right section missing some parts, gear mechanism moving properly but it is probably missing some components. Turning mechanism in the center section (right side) has the...