915-603-5444
+1(915)603-5444__15899.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__15899.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__75073.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__25975.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__09480.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__84910.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__88233.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__43780.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
__91591.1377567893.jpg?c=2 "Baldor M3312T 10 HP AC Motor with Blower Frame 213T")
Warranty Information
For parts or repair- This item is being sold as is, as pictured. As this is for parts or repair no returns will be accepted.
Description
Technical Specifics
- EnclosureODP
- Frame213T
- Frequency60 Hz
- Output @ Frequency10.000 HP @ 60 HZ
- Phase3
- Synchronous Speed @ Frequency3600 RPM @ 60 HZ
- Voltage @ Freqeuncy460.0 V @ 60 HZ
- 230.0 V @ 60 HZ
- 208.0 V @ 60 HZ
- XP DivisionNOT APPLICABLE
- Agency ApprovalsCSA
- UR
- Ambient Temperature40 °C
- Auxillary BoxNO AUXILLARY BOX
- Auxillary Box Lead TerminationNONE
- Base IndicatorRIGID
- Bearing Grease TypePOLYREX EM (-20F +300F)
- BlowerNONE
- Current @ Voltage11.600 A @ 460.0 V
- 23.200 A @ 230.0 V
- 25.600 A @ 208.0 V
- Design CodeB
- Drip CoverNO DRIP COVER
- Duty RatingCONT
- Efficiency @ 100% Load88.5 %
- Electrically Isolated BearingNO ELECTRICALLY ISOLATED
- Feedback DeviceNO FEEDBACK
- High Voltage Full Load Amps11.6 a
- Front Face CodeSTANDARD
- Front Shaft IndicatorNONE
- Heater IndicatorNO HEATER
- Insulation ClassB
- Inverter CodeNOT INVERTER
- KVA CodeF
- Lifting LugsNO LIFTING LUGS
- Locked Bearing IndicatorNO LOCKED BEARING
- Motor Lead ExitKO BOX
- Motor Lead TerminationFLYING LEADS
- Motor Lead Quantity/Wire Size9 @ 14 AWG
- Motor Type3725M
- Mounting ArrangementF1
- Number of Poles2
- Overall Length16.32 IN
- Power Factor91
- Product FamilyGENERAL PURPOSE
- Pulley End Bearing TypeBALL BEARING
- Pulley Face CodeSTANDARD
- Pulley Shaft IndicatorSTANDARD
- Rodent ScreenNO RODENT SCREEN
- Service Factor1.15
- Shaft Diameter1.375 IN
- Shaft Extension LocationPULLEY END
- Shaft Ground IndicatorNO SHAFT GROUNDING
- Shaft RotationREVERSIBLE
- Shaft Slinger IndicatorNO SLINGER
- Speed3450 rpm
- Speed CodeSINGLE SPEED
- Motor StandardsNEMA
- Starting MethodDOL
- Thermal Device - BearingNONE
- Thermal Device - WindingNONE
- Vibration Sensor IndicatorNO VIBRATION SENSOR
- Winding Thermal 1NONE
- Winding Thermal 2NONE
