Technical Specifications

• Enclosure: TEFC
• Frame: 56J
• Frame MaterialSTEEL
• Frequency: 60 Hz
• Output @ Frequency: 3.000 HP @ 60 HZ
• Phase: 3
• Synchronous Speed @ Frequency3600 RPM @ 60 HZ
• Voltage @ Freqeuncy208.0 V @ 60 HZ
• 230.0 V @ 60 HZ
• 460.0 V @ 60 HZ
• XP DivisionNOT APPLICABLE
• Agency ApprovalsCSA
• UR
• Ambient Temperature40 °C
• Auxillary BoxNO AUXILLARY BOX
• Auxillary Box Lead TerminationNONE
• Base IndicatorRIGID
• Bearing Grease TypePOLYREX EM (-20F +300F)
• BlowerNONE
• Current @ Voltage7.800 A @ 208.0 V
• 7.400 A @ 230.0 V
• 3.700 A @ 460.0 V
• Design CodeB
• Drip CoverNO DRIP COVER
• Duty RatingCONT
• Efficiency @ 100% Load82.5 %
• Electrically Isolated BearingNO ELECTRICALLY ISOLATED
• Feedback DeviceNO FEEDBACK
• High Voltage Full Load Amps3.7 a
• Front Face CodeSTANDARD
• Front Shaft IndicatorNONE
• Heater IndicatorNO HEATER
• Insulation ClassF
• Inverter CodeNOT INVERTER
• KVA CodeJ
• Lifting LugsNO LIFTING LUGS
• Locked Bearing IndicatorLOCKED BEARING
• Motor Lead ExitKO BOX
• Motor Lead TerminationFLYING LEADS
• Motor Lead Quantity/Wire Size9 @ 18 AWG
• Motor Type3535M
• Mounting ArrangementF1
• Number of Poles2
• Overall Length14.62 IN
• Power Factor87
• Product FamilyGENERAL PURPOSE
• Pulley End Bearing TypeBALL BEARING
• Pulley Face CodeC-FACE
• Pulley Shaft IndicatorEXT THREAD
• Rodent ScreenNO RODENT SCREEN
• Service Factor1.15
• Shaft Diameter0.625 IN
• Shaft Extension LocationPULLEY END
• Shaft Ground IndicatorNO SHAFT GROUNDING
• Shaft RotationREVERSIBLE
• Shaft Slinger IndicatorNO SLINGER
• Speed3450 rpm
• Speed CodeSINGLE SPEED
• Motor StandardsNEMA
• Starting MethodDOL
• Thermal Device - BearingNONE
• Thermal Device - WindingNONE
• Vibration Sensor IndicatorNO VIBRATION SENSOR
• Winding Thermal 1NONE
• Winding Thermal 2NONE